I own a digital disc repair machine that is no longer supported by its manufacturer. ( 2005 )
It uses an Advantech TPC 642 SE - CE 3.0 Panel PC with touch Screen.
I am told that the Software that runs the machine was pre installed by Advantech.
The unit used a Flash Card to install updates.
I am working with an owner of a like machine ( down for different reason ) to get access to a working Panel PC screen unit with working software. (A)
I have found a used Advantech TPC 642 SE - CE Panel PC with touch Screen ( same model ) Clean that I could purchase. (B)
It uses an Advantech TPC 642 SE - CE 3.0 Panel PC with touch Screen.
I am told that the Software that runs the machine was pre installed by Advantech.
The unit used a Flash Card to install updates.
I am working with an owner of a like machine ( down for different reason ) to get access to a working Panel PC screen unit with working software. (A)
I have found a used Advantech TPC 642 SE - CE Panel PC with touch Screen ( same model ) Clean that I could purchase. (B)
MY
Question: If I have one working unit with Installed Software (A) and
another working unit with NO Software (B) , Can I copy the software
from A to B to get my machine working again ??
All suggestions appreciated greatly.
Thank You