Hi,
We have bought UBC-330 board last week and exploring it. We are struggling with one issue on it.
We have bought UBC-330 board last week and exploring it. We are struggling with one issue on it.
What I have done is edited /etc/network/interfaces file and added 'auto eth1' to start both eth0 and eth1 from boot time
After changes I have connected 2 LAN cables and restarted board but board is not coming up. Not able to login via ssh nor board is showing it in list of router.
I removed one LAN cable and rebooted board and it works. I connected LAN cable to other port while board is running but IP address is not being assigned to new port.
How to fix this?
What I want is to use both LAN1(eth0) and LAN2(eth1) in my program for sending and receiving data.
Thanks,
Bhavesh
What I want is to use both LAN1(eth0) and LAN2(eth1) in my program for sending and receiving data.
Thanks,
Bhavesh